AI  AI  AI  AI
AI-Powered Active 24/7

ConstructAI Your On-Site AI Safety Inspector & Construction Assistant Always On, Always Ready

Upload a jobsite photo. Ask a compliance question. Describe a scenario. ConstructAI gives your field team instant, OSHA-aligned safety guidance, hazard detection, and real-time decision support in seconds, from any phone, on any site, 24 hours a day.

See It In Action Explore Features
<5sAnalysis Time
24/7Always Available
OSHACompliance Aligned
100%Mobile-First
Upload a Photo Results in Under 5 Seconds◆ OSHA & MSHA Compliance Aligned◆ Hazard Detection On Any Device◆ PPE Review Instant Worker Safety Check◆ Available 24/7 No Supervisor Needed◆ Integrates with Live Jobsite Monitoring◆ Prevention Over Reaction Catch It Before It Escalates◆ Expert Guidance On Demand◆ Upload a Photo Results in Under 5 Seconds◆ OSHA & MSHA Compliance Aligned◆ Hazard Detection On Any Device◆ PPE Review Instant Worker Safety Check◆ Available 24/7 No Supervisor Needed◆ Integrates with Live Jobsite Monitoring◆ Prevention Over Reaction Catch It Before It Escalates◆ Expert Guidance On Demand◆
DIRECT ANSWER

What Is ConstructAI?

ConstructAI is a 24/7 AI-powered construction site assistant and safety inspector built by Jobsite Sentry. Your team can upload jobsite photos for instant hazard detection, PPE analysis, and compliance checking or ask plain-English questions about safety scenarios and OSHA requirements and receive expert-level, site-specific guidance in under five seconds, directly from their phone, with no supervisor or manual required.

Interactive Demo

Ask Anything.
Get Answers Instantly.

Select a real jobsite scenario below to see exactly what ConstructAI delivers or type your own question in the chat.

🦺 PPE Compliance Check
⚠️ Site Hazard Scan
📋 OSHA Quick Check
🚨 After-Hours Trespass
🏗️ Scaffold Safety Review
🔍

AI Site Scan

Upload any jobsite photo and ConstructAI identifies hazards, PPE violations, compliance risks, and corrective actions in under 5 seconds.

🧠

Smart Query Assistant

Ask complex construction scenarios in plain English. Get practical, jobsite-specific answers no manuals, no expert calls required.

⚡

Real-Time Decision Support

Validate decisions on the spot, take corrective action immediately, and prevent issues before they escalate into incidents or fines.

ConstructAI Chatbot
What ConstructAI Does

Eight AI Modules. One Expert In Your Pocket.

Every module is purpose-built for construction environments not generic AI. Field-ready, compliance-aligned, and on every phone on your site.

MODULE · 01 / IMAGE ANALYSISACTIVE
🔍

AI Site Scan

Upload any jobsite photo. ConstructAI detects hazards, flags compliance violations, reviews PPE per worker, and delivers corrective actions in under 5 seconds.

ANALYSIS IN <5 SECONDSMost Used
MODULE · 02 / QUERY ASSISTANTACTIVE
🧠

Smart Query Assistant

Ask complex construction scenarios in plain English. "Is this setup compliant?" "What are the risks here?" Practical, jobsite-specific answers in seconds no manuals needed.

PLAIN ENGLISH ANSWERSField Ready
MODULE · 03 / COMPLIANCEACTIVE
📋

Compliance Guidance

Trained on OSHA and MSHA standards. Helps your team stay compliant, reduce fine risk, and maintain correct safety procedures across every site, every day.

OSHA + MSHA ALIGNEDCompliance
MODULE · 04 / DECISION SUPPORTACTIVE
⚡

Real-Time Decision Support

Replace delayed supervisor calls with instant AI-driven field guidance. Validate decisions on the spot and prevent issues before they escalate into incidents or stoppages.

INSTANT ON-SITE ANSWERSReal-Time
MODULE · 05 / MOBILE FIRSTACTIVE
📱

Mobile-First Experience

Built for real-world site conditions. Works on any phone, integrates directly with your camera, and requires zero training for field teams to get expert results from day one.

iOS + ANDROID + WEBZero Setup
MODULE · 06 / INTEGRATIONACTIVE
🔗

Jobsite Sentry Integration

Works alongside Jobsite Sentry's live camera monitoring. ConstructAI enhances your surveillance with AI insights, transforming detection into immediate actionable intelligence.

LIVE MONITORING + AIIntegrated
MODULE · 07 / INSIGHT LAYERACTIVE
📊

Insight & Learning Layer

Over time, ConstructAI identifies recurring safety issues and site patterns giving you the data to fix root causes, improve planning, and build a smarter safety workflow.

SITE PATTERN ANALYSISStrategic
MODULE · 08 / PILL PROMPTSACTIVE
🧩

Guided Pill Prompts

Pre-built one-tap action prompts guide any user instantly. Reduces the learning curve to zero, increases team engagement, and gets first-time users expert results immediately.

ONE-TAP ACTIONSUser-Friendly
MODULE · 09 / COMING SOONPENDING
+

More Modules Coming

ConstructAI is actively expanding. New modules in development contact us for the roadmap.

IN DEVELOPMENTRoadmap
Real-World Example

See ConstructAI Catch What Humans Miss

A worker enters an active concrete pour zone without a hard hat. No supervisor catches it. Here's what happens with and without ConstructAI.

❌ Without ConstructAI
Hazard goes undetected. Risk escalates.
⏱️Hazard unnoticed for 40+ minutes while work continues
📋No compliance record created, no documentation
🚑Active injury risk, legal and insurance exposure open
💸OSHA fine potential: up to $15,625 per violation
🔁No data captured, same problem repeats next week
VS
✅ With ConstructAI
Flagged. Cited. Fixed. Documented. Done.
🔍Hazard flagged: Worker missing hard hat in active zone — OSHA 1926.100(a)
⚡Action: Stop work. Provide PPE. Resume only after compliance confirmed.
📋Compliance record auto-generated with timestamp and OSHA citation
✅Corrective action taken in under 3 minutes, zero incident
📊Insight layer logs PPE gap at this zone for future prevention
Simple To Use

How ConstructAI Works

01

Snap or Ask

Take a photo of the site or type a plain-English safety question. No training, no setup just open the app and go.

02

AI Analyzes

ConstructAI processes the image or query against OSHA and MSHA standards and construction-specific safety data in real time.

03

Results Delivered

Receive a clear breakdown: hazards identified, compliance status, citation references, and specific corrective actions in under 5 seconds.

04

Act & Document

Take corrective action on the spot. ConstructAI logs the event and builds a compliance record, feeding the insight layer for ongoing improvement.

Regulatory Alignment

Built Around
Real Standards

ConstructAI isn't generic AI. It's trained specifically on construction industry safety regulations so when your team gets an answer, it's grounded in the same standards OSHA inspectors use on site.

Every response references the specific regulation, section, and corrective action required giving you documentation that holds up to adjuster and inspector scrutiny.

OSHA 1926
MSHA
ANSI Z87.1
NFPA 70E
NIOSH
ConstructAI Live Analysis Output
›Analyzing site_photo_0923.jpg…
#Running PPE detection pass…
#Checking equipment placement…
#Cross-referencing OSHA 1926.100…
#Scanning fall protection gaps…

›FINDINGS 3 Issues Detected:
!Hard hat absent Worker #2 1926.100(a)
!Guardrail gap north edge 1926.502(b)
!Electrical cord across walkway trip hazard
✓Safety vests 4/4 workers compliant
✓Eye protection compliant

›IMMEDIATE ACTION REQUIRED:
1.Stop work. Issue hard hat to Worker #2.
2.Install temp guardrail north perimeter.
3.Relocate electrical cord clear walkway.

_Risk Level: MEDIUM-HIGH
Every Analysis Includes

What ConstructAI Delivers

Every image scan and query gives your team everything they need to act immediately and document properly.

01

Hazard Identification

Every detected safety hazard, risk zone, and unsafe condition named, located, and described clearly for immediate action by any crew member.

02

OSHA Citation Reference

The specific regulation, section, and standard that applies to each finding so your documentation is inspection-ready from the moment analysis completes.

03

PPE Compliance Report

Worker-by-worker PPE assessment who is compliant, who isn't, and exactly what needs to be corrected before work continues in the affected zone.

04

Corrective Action Steps

Step-by-step instructions for resolving each issue immediately practical, specific, and written for field teams, not safety officers at a desk.

05

Risk Level Assessment

An overall risk rating Low, Medium, High, or Critical so your team knows how urgently to act and in what priority order to address each finding.

06

Compliance & Incident Log

Every analysis is logged with timestamp, site, and findings building an ongoing compliance record and feeding the insight layer for site-wide pattern detection.

📹

Need Evidence of a Past Incident?

ConstructAI catches and prevents issues in real time. But if something already happened and you need to know exactly what, when, and who a Jobsite Sentry Video Review gets you a full analyst-prepared evidence report with timestamped clips, ready for insurance and law enforcement.

Request a Video Review →
Got Questions?

Frequently Asked Questions

What is ConstructAI?+
ConstructAI is a 24/7 AI-powered construction site assistant and safety inspector built by Jobsite Sentry. Your team can upload jobsite photos for instant hazard detection, PPE analysis, and compliance checking or ask plain-English questions about safety and OSHA requirements and receive expert-level guidance in under five seconds, directly from their phone.
What can ConstructAI identify in a jobsite photo?+
ConstructAI can identify potential safety hazards, compliance risks, PPE usage violations per worker, unsafe equipment placement, fall protection gaps, electrical hazards, housekeeping issues, and any site condition requiring corrective action. It provides specific corrective steps and the relevant OSHA citation for each finding.
Is ConstructAI aligned with OSHA and MSHA standards?+
Yes. ConstructAI is trained around real industry standards including OSHA 29 CFR 1926, MSHA, ANSI Z87.1, NFPA 70E, and NIOSH guidelines. Every finding includes the specific regulation and section that applies so your documentation is inspection-ready from the moment the analysis is complete.
How fast does ConstructAI analyze a jobsite photo?+
Analysis is typically completed in under five seconds from upload. This includes hazard detection, PPE review, compliance checking, risk level assessment, and corrective action generation all delivered in a single readable report.
Does ConstructAI work on mobile devices?+
Yes. ConstructAI is designed mobile-first for real-world field conditions. It works on any iOS or Android device, integrates directly with your phone camera for quick photo uploads, and requires zero setup or training for field teams to use effectively from day one.
Can my whole crew use ConstructAI, or just supervisors?+
Any team member can use ConstructAI. The guided pill prompts and plain-English chat interface are specifically designed to reduce the learning curve to near zero workers, foremen, and superintendents alike can get expert-level guidance without any prior AI experience.
How does ConstructAI integrate with Jobsite Sentry?+
ConstructAI works alongside Jobsite Sentry's live camera monitoring systems, enhancing your existing surveillance with AI-powered safety analysis. It transforms detection events into actionable intelligence, improving response time to on-site incidents and safety violations.
What kinds of questions can I ask ConstructAI?+
You can ask anything construction and safety related in plain English. Examples: "Is this scaffold setup compliant?", "What are the risks in this area?", "What should be corrected before work continues?", "What PPE is required for a concrete pour?", "What is the OSHA standard for this type of work?" and much more.
Does ConstructAI replace a safety officer?+
ConstructAI is designed to support and extend your safety program not replace qualified safety professionals. It gives every member of your field team access to expert-level guidance on demand, reduces the delay between hazard detection and corrective action, and builds a stronger compliance record over time. Think of it as a 24/7 safety assistant that never sleeps and is always in the field.
Is ConstructAI included with my Jobsite Sentry plan?+
ConstructAI is available to Jobsite Sentry customers. Availability depends on your current plan tier. Contact the Jobsite Sentry team for details on which plans include ConstructAI access and how to get your team set up.

Expert-Level Safety Insight. In Every Worker's Pocket.

Prevention isn't expensive. Incidents are. ConstructAI gives your entire field team the guidance they need before the hazard becomes an injury, a fine, or a project stoppage.

Get ConstructAI

ConstructAI is a Jobsite Sentry feature available on iOS, Android, and web. Trained on OSHA 29 CFR 1926, MSHA, and real construction safety standards. Analysis delivered in under 5 seconds. Available 24/7 for any field team member no training required.