Permian · Bakken · Midcontinent · DJ Basin

Oil & Gas Site Security That Works Where You Do

Solar-powered 4K surveillance with Starlink and 24/7 live operators, purpose-built for pad sites, tank batteries, compressor stations, and pipeline ROW. No grid power. No cell signal. No electrician. Your lease is live within 24 hours of one call.

Diesel fuel theft attempt stopped, remote wellpad, Permian Basin TX Unauthorized vehicle flagged, pipeline right-of-way, Oklahoma Copper conductor theft intercepted, compressor station, Wyoming After-hours trespasser removed, tank farm perimeter, Houston TX Catalytic converter theft stopped, equipment yard, Midland TX Unauthorized access to hazardous zone flagged, Bakken ND Diesel fuel theft attempt stopped, remote wellpad, Permian Basin TX Unauthorized vehicle flagged, pipeline right-of-way, Oklahoma Copper conductor theft intercepted, compressor station, Wyoming After-hours trespasser removed, tank farm perimeter, Houston TX Catalytic converter theft stopped, equipment yard, Midland TX Unauthorized access to hazardous zone flagged, Bakken ND
What Is Oil & Gas Site Remote Security Monitoring?

Oil and gas site security cameras are solar-powered, AI-enabled surveillance systems engineered to protect remote wellpads, pipeline corridors, compressor stations, tank farms, and refineries around the clock. Unlike conventional CCTV that only records, a fully managed system combines 4K resolution cameras, AI-powered intrusion and perimeter detection, Starlink satellite connectivity, and live human monitoring operators who verify threats and dispatch law enforcement within minutes, with zero dependency on on-site power or cellular infrastructure. Jobsite Sentry deploys this complete system to any oil and gas location in the US within 24 hours, starting from $1.99 per hour with no contract.

Starts at $1.99/hr , no setup fees Live within 24 hours of one call Works at any remote location Starlink satellite , no cell signal needed No contract , cancel anytime Free site survey & installation

Diesel & Crude Theft

Fuel theft from remote wellpads is the most common and costly incident. Unsecured sites lose thousands of dollars per event.

Copper & Aluminum Theft

Electrical conductor theft at compressor stations and meter sites can cause catastrophic shutdowns and regulatory violations.

Equipment & Tool Theft

Remote sites make easy targets for high-value equipment removal. Hours pass before anyone realizes something is missing.

Unauthorized Access & HSE Risk

Trespassers entering hazardous areas create regulatory liability. No monitoring means no documentation if an incident occurs.

Pipeline Right-of-Way Intrusion

Unauthorized excavation, tampering, or trespassing along pipeline corridors poses major safety and regulatory risks.

Vandalism & Environmental Crime

Deliberate sabotage, illegal dumping, and environmental tampering at oil field sites expose operators to costly remediation and regulatory penalties.

Your remote site is not just unmonitored
It is an open invitation

A stolen load of diesel is not just a fuel cost. It is a production shutdown, an HSE incident log entry, and a regulatory conversation you did not want to have. Oil and gas sites face a security threat profile unlike any other industry: remote locations with slow law enforcement response times, high-value assets with no physical access control, and equipment that can disappear overnight with no witnesses. The combination of isolation and high-value targets makes unmonitored oil field operations among the most vulnerable assets in any US energy portfolio.

On-site guards are impractical and expensive for remote wellpads operating 24/7 across hundreds of acres. Basic cameras require cellular connectivity that does not exist in the field. Neither option stops a theft in progress at 2am on a Permian Basin wellpad 80 miles from the nearest town. Jobsite Sentry does.

74%
Of oil field theft occurs between midnight and 6am²
$85K
Average cost per theft incident when production delay is included³
47min
Average law enforcement response time to remote oil field locations

From AI detection to law enforcement dispatch
in under 4 minutes

Once your unit is live, this is what happens every time something moves on your lease, around the clock, on every shift, whether your superintendent is on-site or three states away.

Live Detection Active

AI Perimeter Detection

Computer vision monitors every access road, fence line, tank battery approach, and equipment perimeter without pause. Pump jack motion, flare activity, and wind-driven movement are filtered at the AI layer. Only genuine intrusions, unauthorized vehicles, and after-hours personnel movement trigger an escalation.

Under 4 Minutes

Live Operator Verification

Every AI-flagged alert reaches a trained monitoring operator in under 4 minutes. They pull the live feed, assess the situation, and make the call. No automated queues. A human on every single event.

Real Time Dispatch

Law Enforcement Dispatch

Confirmed threats trigger an immediate call to local law enforcement with your site location, a live threat description, and active footage as evidence. An active dispatch while the event is happening, not a morning report.

Instant Alert

You Receive the Evidence

Your field superintendent receives an instant mobile alert. Timestamped footage, a written incident report covering access time, vehicle description, threat classification, and dispatch outcome. Everything needed for insurance claims, regulatory documentation, or operator liability defense.

How remote oil and gas site monitoring works: Solar-powered 4K camera trailers are positioned at critical points: wellpad access roads, equipment laydown areas, fuel storage, compressor stations, and perimeter fencing. Onboard AI detects intrusion, unauthorized vehicle movement, and after-hours access in real time. Alerts go immediately to live monitoring operators who verify each threat and dispatch law enforcement within minutes, without requiring wired power or cellular connectivity at the site.

Solar-Powered 4K Camera Trailers

Self-contained mobile surveillance units with 4K resolution, onboard AI, and unlimited solar power. No generator, no wiring, no connection to site utilities required. Deploy at a Permian Basin wellpad, a Wyoming compressor station, or a North Dakota tank farm, and it runs indefinitely.

Starlink Satellite Connectivity

Every unit transmits via Starlink satellite, not cellular towers. Whether your site is in the Bakken shale with no cell signal for 60 miles or a remote DJ Basin location, you get the same live coverage, response capability, and mobile app access as any urban site.

Live Oil Field Security Operators

Trained monitoring professionals verify every AI-flagged alert in real time, 24 hours a day. When a genuine threat is confirmed, whether a fuel theft attempt, unauthorized vehicle, or hazardous area intrusion, they contact law enforcement immediately, not the next morning when a crew arrives.

Security features engineered for
the realities of oil and gas operations

Every capability in the Jobsite Sentry platform was built around the specific threats, environments, and compliance requirements of upstream, midstream, and downstream oil and gas sites.

24/7 Live Perimeter Monitoring

Live trained operators watch your site around the clock. Every AI-flagged alert is reviewed by a human within minutes, not hours. Law enforcement is dispatched immediately when a genuine threat is confirmed at your wellpad, tank farm, or compressor station.

Core Protection

AI Intrusion & Vehicle Detection

Onboard AI distinguishes between authorized and unauthorized personnel and vehicles in real time. Access road intrusion, after-hours vehicle activity, and perimeter breaches trigger instant alerts to live operators without false alarms from wildlife or wind.

AI Powered

Asset & Equipment Inventory AI

AI automatically tracks and counts equipment, vehicles, and high-value assets on site. Know within minutes if a piece of equipment moved without authorization, if a vehicle entered the site off-shift, or if fuel levels changed unexpectedly between crew rotations.

Theft Prevention

HSE & Compliance Documentation

Continuous timestamped footage creates an auditable record of every site access event, hazardous area intrusion, and security incident. Support regulatory audits, insurance claims, and incident investigations with verified video documentation automatically stored and retrievable.

Compliance Ready

Mobile App & Remote Command

Review live footage, receive instant incident alerts, and manage site access from anywhere in the world via the Jobsite Sentry mobile app. Whether you are at your Houston office or on a flight, your wellpad, compressor station, and pipeline assets are always in view.

Remote Access

Multi-Site Dashboard

Operators and field supervisors get real-time visibility across every active wellpad, pipeline segment, and facility from a single login. Manage security events, review footage, and track incident history across an entire basin or multi-state portfolio from one unified platform.

Enterprise Ready

Rapid Redeployment

As drilling activity moves, your security moves with it. Solar-powered camera trailers relocate to a new pad or site within hours. No infrastructure to abandon, no new installations to schedule. Protection follows your operation, not the other way around.

Field Ready

Speakdown & Two-Way Audio

Live operators can issue verbal warnings through integrated speakers directly to trespassers or unauthorized personnel on your site. Real-time audio deterrence stops threats before they become incidents, without requiring a guard or law enforcement to be present.

Active Deterrence

GPS-Tracked Trailer Units

Every camera trailer is GPS-tracked so you always know the exact position of your deployed security assets. Real-time location data integrates with the mobile app so operations managers can verify coverage positions across large or dispersed sites at a glance.

Asset Tracking

Real results from real oil field operations

Deployed across upstream, midstream, and downstream sites in the most demanding environments the US energy sector has to offer.

What happens when the AI detects a threat: The moment our AI flags an unauthorized vehicle, perimeter breach, or after-hours activity, a live Jobsite Sentry operator pulls the feed, verifies the threat in under four minutes, and contacts local law enforcement directly. You receive an instant mobile alert with timestamped footage before the responding officer even arrives on scene.
We had three diesel theft incidents in six months on two remote Permian Basin wellpads. After Jobsite Sentry deployed, we went to zero incidents in the following 14 months. The Starlink connection was the key, nothing else worked that far out.
RM
R. Morales
Operations Manager, Permian Basin E&P
The live operators caught a copper theft attempt at our compressor station at 2am. Law enforcement arrived in 18 minutes. Without Jobsite Sentry, that incident would have been a six-figure infrastructure repair and a weeks-long production outage.
KW
K. Williams
Safety Director, Midcontinent Pipeline Operator
We move pads constantly in the Bakken. The fact that Jobsite Sentry trailers redeploy as fast as we do means we have never had an unprotected transition window. That matters at minus-twenty degrees when the nearest sheriff is 50 miles away.
TJ
T. Jensen
Field Operations Supervisor, Bakken Shale Operator
214+
Active wellpads, tank batteries & pipeline sites protected
99.1%
Uptime in Permian, Bakken & Anadarko deployments
<4min
From AI alert to live operator dispatch, every shift
24hr
From one call to live monitoring on your lease

Jobsite Sentry vs the alternatives

How AI-powered remote monitoring stacks up against the two most common alternatives operators fall back on.

Capability Jobsite Sentry On-Site Guard Basic IP Camera
Works with no power or cell signal Yes No No
Live human verification of every alert Yes Limited No
Law enforcement dispatch in real time Yes Sometimes No
AI false-alert filtering (pump jacks, flares) Yes N/A No
Deployed within 24 hours Yes No Varies
Relocates with your pad moves Yes Costly No
HSE & LACT-auditable footage record Yes No Partial
No long-term contract Yes No Varies
Cost per site per year (approximate) ~$17K $50K-$80K+ $2K-$8K

Security solutions built for every oil & gas environment

From remote wellpads to urban refineries, Jobsite Sentry adapts to the specific security requirements of your site type and operational profile.

Wellpad & Drill Site Security

Most pad theft happens between crew rotations, when no one is on-site and no one is watching.

Continuous perimeter monitoring, lease road surveillance, and access control for active and temporary drilling locations. Deployed within 24 hours of spud, relocates to the next pad in hours, not days.

Upstream

Pipeline Right-of-Way Monitoring

A third-party dig-in on an unmonitored ROW can cost $500K+ in repair, downtime, and PHMSA reporting before the day is over.

Camera trailers positioned along ROW corridors detect unauthorized excavation, encroachment, and trespassing. Units reposition alongside your integrity digs, hydro-tests, and inline inspection runs.

Midstream

Compressor Station & Meter Site

Copper conductor and aluminum bus bar theft at an unmanned compressor station can shut down an entire gathering system overnight.

24/7 AI-powered asset detection protects high-value electrical infrastructure at compressor stations, meter sets, and valve sites, catching intrusions before production goes down, not after.

Midstream

Tank Battery & Produced Water Storage

Illegal crude oil siphoning from tank batteries is one of the most underreported theft types in the Permian, losses often go undetected until a LACT discrepancy flags it weeks later.

AI monitoring tracks every vehicle approach to tank batteries and produced water storage, flags after-hours access, and creates a timestamped record of every LACT measurement window.

Upstream / Midstream

Pumping Unit & SWD Monitoring

Diesel siphoning from pumpjack engine tanks is the most common oilfield theft in Texas and Oklahoma, and it rarely gets reported because operators assume it was an internal discrepancy.

Independent solar-powered cameras at each pumping unit and SWD site provide coverage with no shared infrastructure across the field. Every fuel access, every vehicle, every shift, logged automatically.

Upstream

Refinery & Processing Facility Perimeter

Secondary access points and contractor staging areas at refineries are the most common entry vector for unauthorized personnel, and the hardest for fixed CCTV to cover.

Supplemental mobile surveillance at fractionation plants, gas processing facilities, and refinery perimeters. AI-powered vehicle and personnel detection at contractor yards, maintenance laydown areas, and secondary fence lines.

Downstream

Active in 24 hours, from any location in the US

One call activates the entire deployment process. From initial consultation to live AI monitoring, your oil and gas site is protected faster than your next vendor meeting would even be scheduled.

1

One Call to an Oil Field Security Specialist Free

Call +1 (800) 298-3942 or submit the form. A specialist responds same day to understand your pad layout, lease acreage, crew rotation schedule, and any prior theft or trespass history, no long procurement intake, no committee.

2

Wellpad & Facility Coverage Survey Free

We walk your pad site, compressor station, or right-of-way corridor to map camera placement across every blind spot: lease access roads, tank battery perimeter, fuel storage, LACT unit, and laydown yard. Starlink signal verified on-site before deployment.

3

Unit Installed at Your Wellsite Free

Our field crew mounts the solar-powered 4K camera unit, bolted to a fence post, wellhead, or freestanding pole, no concrete pour, no electrician, no IT contractor. Starlink dish is pointed and locked. Units go live within 24 hours of survey completion, even in basin areas with no cell coverage for 60 miles.

4

Your Lease Is Live, Alerts Go to Your Super

AI perimeter detection activates from minute one. Live operators monitor every shift, around the clock. Incident alerts route directly to your field superintendent's phone, not a call center queue, not an email report the next morning. Review footage from your truck, your operations center, or the doghouse.

Jobsite Sentry team installing security camera unit at an oil field wellpad

Oil & gas site security deployed
across major US energy basins

Active monitoring across the most critical upstream, midstream, and downstream energy markets in the United States.

Permian Basin Anadarko Basin DJ Basin Powder River Bakken Gulf Coast Williston, ND Bakken Casper, WY Powder River Denver / Greeley, CO DJ Basin Oklahoma City, OK Anadarko / SCOOP-STACK Tulsa, OK Midland / Odessa, TX Permian Basin Dallas / Fort Worth, TX Barnett / Pipeline Hub Houston, TX Gulf Coast Hub Your Location Any US oil & gas basin Deploy within 24 hours → Active monitoring site Energy basin region
Permian Basin, TX
Anadarko / SCOOP-STACK, OK
DJ Basin / Wattenberg, CO
Powder River Basin, WY
Bakken / Three Forks, ND
Gulf Coast / Midcontinent
Permian Basin, TX
Anadarko / SCOOP-STACK, OK
DJ Basin / Wattenberg, CO
Powder River Basin, WY
Bakken / Three Forks, ND
Gulf Coast / Midcontinent

Answers that matter to
oil & gas professionals

Questions from operations managers, field supervisors, and safety directors we hear every day. If yours is not here, call us and an oil field security specialist picks up.

Talk to a specialist

Available Mon–Fri, 8am–6pm. Emergency support 24/7.

+1 (800) 298-3942
Solar-powered 4K camera trailers with Starlink satellite connectivity and 24/7 live operator monitoring. No wired power, no cell signal required. Jobsite Sentry units go live within 24 hours, start at $1.99/hr, and operators dispatch law enforcement in real time when a genuine threat is confirmed.
Jobsite Sentry's solar-powered trailers connect via Starlink satellite, requiring zero wired power, no generator, and no cell signal at the site. Each unit is fully self-contained and begins AI-powered monitoring with live operator response within 24 hours, regardless of location remoteness.
Yes. AI detects unauthorized vehicle access and after-hours activity near fuel storage in real time. Live operators verify and dispatch law enforcement before a theft is completed. The Asset Inventory AI also flags fuel storage area changes between crew rotations, catching incidents that start between shifts.
Yes. Solar-powered trailers position along pipeline ROW to monitor compressor stations, meter sets, valve sites, and open corridors. Starlink covers the most remote segments. Units reposition alongside inspection and maintenance runs so your highest-risk corridor is always monitored.
Continuous timestamped footage creates an auditable record of every site access event and hazardous zone intrusion. AI flags personnel in restricted areas and unauthorized vehicles near infrastructure, producing documented evidence for regulatory audits, insurance claims, and incident investigations with no manual logging required.
Typically within 24 hours of a free site consultation. Same-day deployment is available for urgent situations. Technicians handle all positioning, configuration, and Starlink setup. No electricians or contractors needed. For pad moves, the unit relocates in hours.
Yes. A single dashboard gives operations managers real-time visibility across every wellpad, compressor station, and facility. Mobile app alerts and footage access work simultaneously across your entire basin or multi-state portfolio from one login.
Yes. IP66-rated enclosures operate from -40°F to 140°F with wind-load rated mounts. Solar panels hold charge in partial sun. Units have run continuously through West Texas sandstorms and North Dakota blizzards without downtime.
No. Pump jack motion, flare stack activity, and wind-driven movement are filtered at the AI layer before any alert is escalated. Only genuine perimeter intrusions, unauthorized vehicles, and after-hours personnel trigger live operator response. Purpose-configured oilfield AI eliminates the nuisance-alert problem common with generic camera systems.
Yes. AI logs every truck entry and exit, timestamped with visual footage. Produces an auditable record of hauler visits and contractor access cross-referenceable against LACT measurements and manifests. Operators have used this footage to identify and resolve unauthorized off-loading events.
Yes. At $1.99/hr, Jobsite Sentry costs a fraction of a guard ($50K-$80K/site/year). One prevented diesel theft typically covers a full year of monitoring. No setup fees, no contract, free installation — the financial risk of starting is zero.

Every unmonitored night is a risk
your operation cannot absorb

One call deploys solar-powered 4K oil field security cameras with Starlink connectivity and live operators on watch, active within 24 hours at any US location, with zero upfront costs and no contract.

Free site survey Free camera installation No contract required No hidden costs Live within 24 hours